Home Theatre Problems

Admin (12) (12)

If you have a home theatre system, then enjoying quality time over movies must be a part of your life. But being a machine, it can suffer from disruption at any point in time. They are more prone to trouble as they have lots of wires. Not only that, but home theatre systems also come with a lot of switches and settings. It is quite common to encounter problems with a home theatre system.



We have narrowed down seven most likely problems that all owners might face some time in the lifespan of a home theatre system. Keep this guide handy, and in case you bump into any of these problems, you will be able to resolve them instantly.

1. Sound– If you are setting up the system and after it's done, no sound comes, then the reason can be pretty uncomplicated one. Since there are so many parts and wires, it is common to have the sockets ill-connected or the plugs not inserted properly. Check all the sockets for each of the devices, also check the plugs. Make sure everything is in place and well-inserted. Now again try to switch it on, the sound should come.
2. Front speakers not working – It can be the volume button is not working. If that is not the case, then check the power chords for the speaker. If they are not correctly inserted or plugged in, this problem can happen. You may also have to adjust the receiver frequency and the subwoofer. Changing the settings should resolve the issue. Make sure the correct frequency and other inputs on the device.

3. Static problem – One of the most apparent indications of static is a problem with the amplifier. The amplifier may not match the devices you are using, and this can happen. Another more straightforward reason behind static is the fact that the wire connecting the speaker and the amplifier is suffering from a loose connection or has suffered from damage. Check the wiring and take the needful steps to repair it in case of damage.

4. Malfunctioning remote
 – A remote that does not work is far too common of a problem. If the buttons have sunk in, then you must get the remote changed or replaced. If a remote is not working despite being in perfect condition, it can be the result of low battery. If it is a chargeable remote you are using, recharge it. Or if you can remove the battery then replace with new ones.

5. Surround sound not working
 – The most common cause behind the surround sound not working will sure surprise you. The reason can be that the speaker’s volume has been turned off or are set at low. If turning the volume up does not solve the problem, then there can be trouble with the settings. If the settings in the speakers and your receiver set do not match this problem can happen. Also, ensure that the speakers can detect the receivers and vice-versa.

6. Humming sound
 – A very disturbing and annoying humming sound may come from your speakers. It can sound like an echo. Multiple speakers interfere with each other frequency and magnetic field. It causes this kind of sound. Maintain the distance between speakers and amplifiers as recommended by the home theatre system. Not paying attention to it can cause the disturbance, when appropriately placed, the issue will get immediately resolved.

7. Height speakers making noise
 – Height or ceiling speakers rarely create a problem. If it is making noise or is not delivering sound accurately, then you will have to change the settings manually. The CODEC settings are the ones that will need to match with your receiver and device.
A home theatre system is a matter of pride and enjoyment. Keep yours in good shape and relish your favourite movies and programs at the comfort of your own home. Connect with 
professional home theatre repair experts timely to avoid further complications and expenses.

Whether you've invested in a high quality set of JENSEN floor standing speakers, in-ceiling speakers or in wall speakers, one thing is certain - you can't expect any piece of technology to operate 100% perfectly 100% of the time. Every so often things can and will go wrong, as Murphy's Law seems hell bent on proving every now and again. The key thing to remember here is that most problems can be solved in just a few quick moments, so long as you know what to do and how to do it.

CHECK YOUR SPEAKER WIRES FOR LOOSE CONNECTIONS

If you suddenly get static-filled audio or the occasional dropped connection to your JENSEN home theater system, the most common culprit is likely a loose connection. It happens - don't worry about it. Maybe you moved your home theater receiver by accident while you were dusting, or your cat decided that the speaker wires looked a whole lot more like play things than you're comfortable with. Carefully examine the back of each JENSEN speaker and the home theater receiver to make sure that nothing is loose and if it is, address the issue to solve your problem.

A FIRMWARE UPDATE IS JUST WHAT THE DOCTOR ORDERED

Think of firmware as the "brain" of your home theater system. Much like the operating system on a computer, it tells hardware what to do and how to do it at any given time. If you're experiencing a problem that you just can't seem to fix, visit the manufacturer's website and see if a firmware update is available for your home theater receiver. Manufacturer's regularly release these updates all the time to address certain issues and even add new features, so be sure to stay current for the best possible results.

CHECK THE SOURCE

The moment you begin to experience audio-related issues, it can be natural to assume that your own equipment is the culprit. This won't necessarily always be the case, however, and in fact almost never is. If you're watching a Blu-ray, put the disc into another Blu-ray player in your home and see if you can recreate the problem. If you're watching TV, turn the same channel on with another TV and see if the issue persists. If it doesn't, the issue isn't with your JENSEN home theater speakers at all and is actually a temporary problem that is unfortunately beyond your control.

TEST YOUR CABLES

If an issue has developed with either your speaker wire or the HDMI cable that connects your home theater speakers to your TV, check to see if replacements are needed. Take that cable and plug it into a different TV and receiver in your home, for example, to see if the problem persists. If it does, a trip down to the local electronics store for a replacement is probably in order.

If you want to create the best home theater speaker system you can, you’ll want to choose the correct speakers for your environment. That’s why  you can bet on JENSEN speakers. Whether you are looking to install slimline and stunning in-wall speakers or in-ceiling speakers, or you are searching for the best price on a surround sound system, JENSEN speakers has the home theater audio solution for you.

Comments


John Smith (augest 12-4-2016)

Tnjected humour, or randomised words which don't look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text

John Smith (augest 12-4-2016)

Tnjected humour, or randomised words which don't look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text

John Smith (augest 12-4-2016)

Tnjected humour, or randomised words which don't look even slightly believable. If you are going to use a passage of Lorem Ipsum, you need to be sure there isn't anything embarrassing hidden in the middle of text

Add Replay


About Blog

If you have a home theatre system, then enjoying quality time over movies must be a part of your life. But being a machine, it can suffer from disruption at any point in time. They are more prone to trouble as they have lots of wires. Not only that, but home theatre systems also come with a lot of switches and settings. It is quite common to encounter problems with a home theatre system.


Related Catogery
  • Future Technoloy
  • Java Spring
  • New SEO Tips
  • Future Technoloy
  • Digital Computing
  • Cloud Computin
  • UI DEvelopment
  • Android Development
  • Shift for IOS
Latest Post

Blog Image 1

Contrary to popular belief get other dett

Blog  Image 2

Contrary to popular belief while this

Blog Image 3

Contrary to popular belief get the